Wardrobe production process is a key part

The overall wardrobe production process is better. Under normal circumstances, the three sides of the wardrobe are edge-sealed, and one side will be set aside for customers to check the quality of the base material of the wardrobe. When looking at the quality of the substrate, we can first scrape it with a fingernail to see if the substrate can scrape out powder. If the powder can be scraped out, it means that the quality of the substrate is not good, no matter how much the price is. Such a whole wardrobe cannot be purchased, because even if it is bright and beautiful when it is just put into the home, it will not take long for it to be seriously deformed or even broken in a slightly humid environment.

Therefore, when we choose, we must choose the overall wardrobe that cannot scrape out the powder. This is only the first step. The next step is to smell it with the nose to see if these substrates have any irritating taste. If the smell is heavy, it means that The wardrobe itself may have excessive formaldehyde, which will cause great harm to the human body. We also cannot buy such a wardrobe.

After that, it is time to check the veneer of the whole wardrobe. You might as well touch it with your hand to see if the canvas is flat, whether the texture of the veneer is neat and clear, and the gloss of the surface of the generally good-quality panel is also high. It will be correspondingly higher, and the texture of the panel is very clear, we will feel very smooth when we touch it, and the hand feel is very good. At the same time, regular manufacturers will also mark the anti-counterfeiting mark on the whole wardrobe, which can also be convenient for us to detect.

Under normal circumstances, the veneer of the whole wardrobe is mostly made of melamine stickers. Such stickers are more stable, and have moisture-proof, acid and alkali resistance, and are not prone to deformation. At the same time, this dry sticker When making the panel, it also saves the later painting work and reduces the possibility of surface cracking that may occur on the panel. Therefore, we have to choose a more environmentally friendly melamine board as the base material, which may reduce some harmful gases. to affect our health.

To see whether the overall wardrobe is good, it also depends on his edge. If the plates produced by regular manufacturers use a better edge banding machine, the quality of the edge banding is often higher, and the interface between the two plates cannot be seen at a rough glance. And the strength is also greater, not easy to separate.